Certification 156-836 Cost, Real 156-836 Dumps Free

Begin to learn the 156-836 exam questions and memorize the knowledge given in them. Only ten days is enough to cover up the content and you will feel confident enough that you can answer all 156-836 Questions on the syllabus of 156-836 certificate. Such an easy and innovative study plan is amazingly beneficial for an ultimately brilliant success in exam.

Our company will promptly update our 156-836 exam materials based on the changes of the times and then send it to you timely. 99% of people who use our learning materials have passed the exam and successfully passed their certificates, which undoubtedly show that the passing rate of our 156-836 Test Torrent is 99%. If you fail the exam, we promise to give you a full refund in the shortest possible time. So our product is a good choice for you. Choosing our 156-836 study tool can help you learn better. You will gain a lot and lay a solid foundation for success.

>> Certification 156-836 Cost <<

Real 156-836 Dumps Free | Practice 156-836 Test

Knowledge of the 156-836 real study dumps contains are very comprehensive, not only have the function of online learning, also can help the user to leak fill a vacancy, let those who deal with qualification exam users can easily and efficient use of the 156-836 question guide. By visit our website, the user can obtain an experimental demonstration, free after the user experience can choose the most appropriate and most favorite 156-836 Exam Questions download. Users can not only learn new knowledge, can also apply theory into the actual problem, but also can leak fill a vacancy, can say such case selection is to meet, so to grasp the opportunity!

CheckPoint 156-836 Exam is a vendor-specific certification exam that is offered by Check Point Software Technologies. 156-836 exam is designed to test the candidate's knowledge and skills in various areas such as Check Point Certified Maestro Expert - R81 (CCME) architecture, deployment, configuration, and management. 156-836 exam consists of multiple-choice questions and is administered in a proctored environment.

The Check Point Certified Maestro Expert certification exam is a challenging exam that requires a strong understanding of Check Point’s Maestro architecture, including its distributed security system, its high-availability features, and its ability to scale. Candidates for this certification should have a deep understanding of network security concepts and be experienced with Check Point’s security solutions. The CCME exam covers a range of topics, including Maestro architecture, deployment, management, troubleshooting, and security policies.

CheckPoint Check Point Certified Maestro Expert - R81 (CCME) Sample Questions (Q72-Q77):

NEW QUESTION # 72
What kinds of transceivers are supported on Orchestrator MHO-170?

A. SFP+, SFP28, QSFP
B. SFP, QSFP, QSFP28
C. SFP, SFP+, SFP28
D. QSFP, QSFP28

Answer: D

Explanation:
Explanation
The Orchestrator MHO-170 supports QSFP and QSFP28 transceivers on its 32x 100 GbE ports. QSFP stands for Quad Small Form-factor Pluggable and QSFP28 is an enhanced version of QSFP that supports up to 28 Gbps per lane. These transceivers can provide high-speed and high-density connectivity for the Maestro environment.
References
*Maestro Hyperscale Orchestrator Datasheet - Check Point Software1, page 2
*Maestro Transceiver & DAC Inventory - Check Point CheckMates

NEW QUESTION # 73
How many orchestrators may Dual-Site include?

A. 2 or 4
B. Only 4
C. 0
D. 1

Answer: A

Explanation:
A Dual Site environment can include either two or four orchestrators, depending on the scenario. There are three primary scenarios for Dual Site configuration:
*Direct connectivity between remote site orchestrators: This scenario requires two orchestrators, one for each site, and a direct connection between them using the site-sync port.
*Two orchestrators on the same site are connected to the remote site orchestrators through two different switches: This scenario requires four orchestrators, two for each site, and a connection between them using the site-sync port and two external switches that support QinQ and MTU increment.
*Two orchestrators on the same site are connected to the remote site orchestrators through one switch: This scenario also requires four orchestrators, two for each site, and a connection between them using the site-sync port and one external switch that supports QinQ and MTU increment.
References =
*Maestro Dual Site configuration with a direct connection through L2 switches
*Dual Site Single Maestro Hyperscale Orchestrator Cluster (Dual Site Single MHO Redundancy)
*Maestro Frequently Asked Questions (FAQ)

NEW QUESTION # 74
What is an uplink interface used for?

A. To connect appliances to customer's infrastructure
B. To connect in between Orchestrators
C. To connect in between appliances
D. To connect Orchestrators to customer's infrastructure

Answer: D

Explanation:
An uplink interface in a Check Point Maestro environment is specifically used to connect Maestro Hyperscale Orchestrators (MHOs) to the customer's network infrastructure, such as switches, routers, or firewalls. These interfaces facilitate the transmission and reception of management and control traffic between the MHOs and the customer's network. They are critical for integrating the Maestro system with the external network environment.
Exact Extract:
"Uplink interfaces are used to connect Maestro Hyperscale Orchestrators (MHOs) to the customer's network infrastructure, such as switches, routers, or firewalls. They are also used to send and receive management and control traffic from the customer's network to the MHOs."
-Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 1: Introduction to Check Point Maestro, Lesson 1.3: Maestro Interfaces, page 1-10
-Check Point R81 Maestro Administration Guide, Chapter 1: Introduction to Check Point Maestro, Section:
Interfaces, page 1-8
Explanation of Options:
* A. To connect in between appliances: Incorrect, as uplink interfaces are not used to connect appliances (Security Group Members) to each other. This is typically handled by downlink interfaces or internal backplane connections.
* B. To connect appliances to customer's infrastructure: Incorrect, as appliances (SGMs) connect to the Orchestrators via downlink interfaces, not directly to the customer's infrastructure.
* C. To connect Orchestrators to customer's infrastructure: Correct, as uplink interfaces are explicitly designed for this purpose, as stated in the courseware and administration guide.
* D. To connect in between Orchestrators: Incorrect, as connections between Orchestrators (e.g., in a Dual-Site setup) are typically handled via site-sync ports, not uplink interfaces.
References:
Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 1: Introduction to Check Point Maestro, Lesson 1.3: Maestro Interfaces, page 1-10 Check Point R81 Maestro Administration Guide, Chapter 1: Introduction to Check Point Maestro, Section:
Interfaces, page 1-8

NEW QUESTION # 75
How does HyperSync work in a Dual Site environment?

A. Each active connection has a backup connection on the second site (remote site.)
B. Each active connection has two local backups (on the local site) and a third backup connection on the second site (remote site.)
C. Each active connection has a local backup (on the local site) and a second backup connection on the second site (remote site.)
D. Each active connection has a local backup (on the local site) and a second backup connection on each of the MHOs.

Answer: C

Explanation:
HyperSync is a feature of Maestro that enables stateful synchronization of connections and resources across different sites in a Dual Site environment. HyperSync works by creating two backup connections for each active connection: one on the same site as the active connection, and another on the remote site. This ensures that the connection can be seamlessly resumed in case of afailover event, either within the same site or across the sites. HyperSync uses the Site-Sync port and VLANs to transmit the synchronization packets between the Security Group Members and the Maestro Orchestrators.
References =
*Maestro Dual Site configuration with a direct connection through L2 switches
*Maestro Frequently Asked Questions (FAQ)
*CHECK POINT MAESTRO EXPERT

NEW QUESTION # 76
What type of cluster can a Security Group be compared to?

A. Active / Standby
B. VSLS
C. Load Sharing Active / Active
D. Active / Backup

Answer: C

Explanation:
A Security Group (SG) in Check Point Maestro is comparable to a Load Sharing Active/Active cluster. This is because a Security Group consists of multiple Security Group Members (SGMs) that actively share the traffic load, provide high availability, and ensure scalability. Each SGM processes traffic according to the Security Group policy and synchronizes its state with other members, similar to how a Load Sharing Active/Active cluster distributes traffic across multiple nodes.
Exact Extract:
"A Security Group can be compared to a Load Sharing Active/Active cluster because it consists of multiple Security Group Members that share the traffic load and provide high availability and scalability. Each Security Group Member is an active firewall that processes traffic according to the Security Group policy and synchronizes its state with other members. The Maestro Orchestrator acts as a load balancer that distributes the traffic among the Security Group Members based on their capacity and availability."
-Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 2: Maestro Security Groups, Lesson 2.1: Introduction to Security Groups, page 2-4
-Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Security Group Overview, page 2-3 Explanation of Options:
* A. Load Sharing Active / Active: Correct, as the Security Group operates like a Load Sharing Active
/Active cluster, with all SGMs actively processing traffic and sharing the load, as described in the documentation.
* B. VSLS: Incorrect, as Virtual System Load Sharing (VSLS) is a specific Check Point clustering mode for Virtual Systems, not directly comparable to a Security Group's architecture.
* C. Active / Backup: Incorrect, as this implies only one node is active while others are passive, which does not align with the active load-sharing nature of Security Groups.
* D. Active / Standby: Incorrect, as this also implies a single active node with standby nodes, whereas all SGMs in a Security Group are active.
References:
Check Point Certified Maestro Expert (CCME) R81.X Courseware, Module 2: Maestro Security Groups, Lesson 2.1: Introduction to Security Groups, page 2-4 Check Point R81 Maestro Administration Guide, Chapter 2: Maestro Security Groups, Section: Security Group Overview, page 2-3

NEW QUESTION # 77
......

To find the perfect 156-836 practice materials for the exam, you search and re-search without reaching the final decision and compare advantages and disadvantages with materials in the market. With systemic and methodological content within our 156-836 practice materials, they have helped more than 98 percent of exam candidates who chose our 156-836 guide exam before getting the final certificates successfully.

Real 156-836 Dumps Free: https://www.actualtestsit.com/CheckPoint/156-836-exam-prep-dumps.html